Find the part you need:
Full-length shank shinguard to suit the #9 shank assemblies or the #8 hybrid assemblies. The #9 shinguard provides protection up the full face of t...
View full detailsFull-length shank shinguard to suit the #9 shank assemblies or the #8 hybrid assemblies. The #9 shinguard provides protection up the full face of t...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy duty rock teeth across th...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This Tungsten H/F Blade has been hard-faced on all leading e...
View full detailsThe #9 blade is unique to Agrowplow and is the superior ripping blade for your plough. This GP blade comes with 3 x heavy-duty rock teeth across th...
View full detailsHardened pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate ...
View full detailsPunch specifically designed to secure the 7/16" roll pins into the #9 Hydraulic Shank Assembly. This punch is made out of 4140 steel and has been h...
View full details30mm diameter pin to secure the top of the hydraulic cylinder in the #9v2 shank assembly. Suits the Hydraulic Cylinder 3" Bore (153-4217).
Chrome pin utilised on the #9 shank hydraulic recoil assembly. The 2 x 7/16" rollpins provided can be installed using the 7/16" punch. Alternate Pa...
View full detailsThis hydraulic carrier for the #9v2 shank hydraulic assembly is used in tandem with the clamp plate to mount it to both 150x150 RHS frames and 200x...
View full detailsThis hydraulic swing arm is part of the current #9 shank recoil assembly and supersedes the swing arm without spherical bearings. It comes in a bla...
View full detailsThis bearing spacer is utilised on the #9 Hydraulic Swing arm and has been designed to fit through a 40mm bearing. There are 2 spacers utilised per...
View full detailsThis support arm is part of the #9 hydraulic shank assembly and is commonly referred to as a dogbone. Alternate Part No.006-402
Current hydraulic cylinder for the #9 Hydraulic Shank Assembly. Has a 3" bore and 9" cylinder rod displacement. Pin-eye cylinder bush is 30.2mm str...
View full details3/4" JIC MALE, 3/4" UN O RING MALE
Fabricated part equivalent to 154-0016. Used on hydraulic cylinder 153-4208 in tandem with brass flow restrictor USE 154-0016
Industrial application Teflon coated steel bush designed for wear with resistance to dust and dirt exposure. Lubrication and maintenance-free bush....
View full detailsThe Spherical Bearing is used on the #9 hydraulic Swing Arm and is Teflon-lined for grease-free maintenance. It has an OD of 62mm and an ID of 40mm...
View full detailsUsed in the #8 and #1 Hydraulic Assemblies. Fits in the port of cylinder 153-4200.